| 22 Materials included for installation: DIRECT TO FASCIA MOUNT FASCIA MOUNT INTERMEDIATE POST WITHOUT BRACKET It is the responsibility of the installer to meet all code and safety requirements, and to obtain all required building permits. The deck and railing installer should determine and implement appropriate techniques to each installation. RailFX® or its distributors shall not be held liable for improper or unsafe installations. Determine appropriate layout and post spacing – Maximum post spacing of 60" on center. Ensure that proper blocking is in place before mounting post. Step 1 End posts must be installed prior to intermediate post placement. A level string can be used to properly align all intermediate posts. Posts must be 34-1/2" above deck board for a 36" rail height. Step 2 Mark post at deck height to use as a reference point. Step 3 From the mark created, measure down to first hole and mark. The second hole must be at least 4-1/2" down from the first hole. After marking, drill holes. Holes should be marked and drilled separately. If needed, trim excess off end of post.
RkJQdWJsaXNoZXIy MzU1MDAz