25| SURFACE MOUNT STAIR END POST Step 4 Insert cable into first hole of top end post (previously mounted) and pull tightly along side the bottom end post. Ensure that cable is evenly spaced above the nose of the treads, then mark the bottom end post, using masking tape, where the cable intersects the post. Step 5 Measure distance (Distance “X”) from the mark made in Step 4 to the top of the base plate. Step 6 Use Distance “X” from Step 5 and measure down from the center of the first hole (closest to the tread).
RkJQdWJsaXNoZXIy MzU1MDAz