27| NOTE: Post comes long on top and bottom and will require trimming prior to installation. SURFACE MOUNT STAIR INTERMEDIATE POST Step 1 Temporarily install base plate with 2 screws. Step 2 Determine location of bottom end post and mark base plate holes. Step 3 Temporarily fasten post. Step 4 Insert cable into first hole of top end post (previously mounted) and pull tightly along side the bottom end post. Ensure that cable is evenly spaced above the nose of the treads, then mark the bottom end post, using masking tape, where the cable intersects the post.
RkJQdWJsaXNoZXIy MzU1MDAz