| 28 SURFACE MOUNT STAIR INTERMEDIATE POST Step 8 Re-attach base plate to bottom of cut post with all 4 screws. (Use beeswax for easier install). Step 9 Before final post attachment, the top of the post will need to be cut accordingly, so cable is 3-1/2" or less from top rail. NOTE: Ensure that top rail is 34" above stair. Step 7 Remove post from tread and remove base plate from post before cutting. Then, cut post at marked cut line from Step 6. Step 5 Measure distance (Distance “X”) from the mark made in Step 4 to the top of the base plate. Step 6 Use Distance “X” from Step 5 and measure down from the center of the first hole (closest to the tread). Step 10 Attach post to surface. Step 11 Finished post installation. Bolt caps (Shown) or post skirt.
RkJQdWJsaXNoZXIy MzU1MDAz