40 | CABLE INSTALLATION GUIDE RailFX® LOW PROFILE CABLE KIT INSTALLATION INSTRUCTIONS 8. Go to the other end and tension the cable by holding the cable tightly with cable gripping pliers while turning the receiver with an Allen hex wrench. Be careful to protect the cable from damage while tensioning. 9. Tension in sequence beginning with the center cable and moving back and forth toward the top and bottom. As each cable is tensioned, give a sharp pull downward midspan to help set the locking wedges in the pull-lock fitting. Then re-tension as necessary in the same sequence. 10. Cut the cable flush with the hole in the back of the fitting using a cut-off wheel. Then press cap onto fitting.
RkJQdWJsaXNoZXIy MzU1MDAz